Technical specifications
The normal mode of operation is background. When the humidity increases, the maximum mode is turned on and the air in the bathroom is quickly replaced.

The characteristics of the device vary depending on the mode.
Performance 70 - 150 м³/час
Static pressure 130 - 360 Па
Noise level 35 - 58 дБ
Power consumption 10 - 1500 Вт
Power 220 В / 50 Гц
This fan is built into the ceiling and has the following dimensions.
Size (Д × Ш ×В) 313 × 477 ×180 мм
Mounting diameter 100 мм
Weight 6 k.g


Adjustable air volume (80 - 150 cubic meters/hour)
Dehumidification (removal of excess humidity)
Air heating in the bathroom.
Hair and body drying ("hair dryer" function)
3-step security system
Remote control with LCD display
High-density check valve.
Operating mode and temperature indicator


Performance is the main criterion on which the efficiency of air exchange depends. It is measured in m3/h and shows how much air the fan can remove in 1 hour of time. The high performance of this model provides a volume of air sufficient for rooms with an area of 6 - 8 m2.

Static pressure is the head, the pressure difference of the air flow before and after the fan (after the fan, the air has a higher pressure than before). It is due to the pressure that the air is pushed through the ducts, grilles, etc. The Himpel Huezentte FHD-P150S1 model is a medium static pressure fan that provides for the connection of medium–length air ducts (sleeves several meters long).

The noise level of 35 dB is perceived as a natural background noise, meets sanitary standards and is safe for health.

Power consumption – the greatest power is consumed for heating and reducing humidity, 10 - 15 watts is enough for ventilation.


Additional benefits
Molded urethane coating of the printed circuit board.

Three-stage security system: bimetallic fuse + thermal sensor + thermal fuse automatically turn off the power when overheating, exceeding the permissible temperature level, and also protect the device from short circuit and voltage drops.

Centrifugal ventilation system – air is sucked in by a turbine with blades. Inside the housing, the flow is twisted into a spiral and receives additional acceleration due to centrifugal force. The flow does not flow along a straight axis, but at an angle of 90 degrees into a special device - a snail.

Due to the design and creation of additional traction, such hoods are more efficient than axial ones. The main operating mode is minimum speed and minimum power consumption. The hood perfectly "pulls" for a long time in the background, for "on-duty" cleaning. When the humidity increases, the maximum mode is turned on and the air in the bathroom is quickly replaced.

High–density check valve - prevents the penetration of unpleasant odors into the room, guarantees the replacement of air with various impurities with fresh air. The high density of the valve provides maximum protection against odors and dust coming from the ventilation shaft.

Air electric heater (RTS) - semiconductor ceramic stones made of polycrystalline ceramics based on barium titanate (posistors) have such advantages as: self-regulation, energy efficiency, reliability, high specific power, long (at least 20 thousand hours of continuous operation) service life.

Features
• The exhaust fan is designed for installation in the toilet and bathroom.
• The fan is made in a white plastic case and is optionally equipped with decorative grilles.
• Fits perfectly into the interior and does not take up much space.
• Stylish design, high-density check valve, bearing motor, replaceable grilles of different shapes and colors.
• A centrifugal ventilation system is used.
• Ability to work in a humid environment.
• Silent operation and low power consumption.
• High performance.


Technical specifications
Exhaust ceiling fan Himpel Flrex C2-100 L designed specifically for installation in the toilet and bathroom and has the following characteristics:
Efficiency: 90 m3/h
Static pressure: 25 ~ 180 Pa
Noise level: 30 dB
Power consumption: 22 watts
Degree of protection against water and dust: IPX5
Size: 205 × 205 ×160 mm
Grid: 205 – 212 mm
Food: 220V/ 60Hz
Weight: 1.4kg

Features
• The exhaust fan is designed for installation in the toilet and bathroom.
• The fan is made in a white plastic case and is optionally equipped with decorative grilles.
• Fits perfectly into the interior and does not take up much space.
• Stylish design, high-density check valve, bearing motor, replaceable grilles of different shapes and colors.
• A centrifugal ventilation system is used.
• Ability to work in a humid environment.
• Silent operation and low power consumption.
• High performance.


Technical specifications
The exhaust ceiling fan Himpel Flrex C2-100 L is designed specifically for installation in the toilet and bathroom and has the following characteristics:
Efficiency: 90 m3/h
Static pressure: 25 ~ 180 Pa
Noise level: 30 dB
Power consumption: 22 watts
Degree of protection against water and dust: IPX5
Size: 205 × 205 ×160 mm
Grid: 205 – 212 mm
Food: 220V/ 60Hz
Weight: 1.4kg